|
PCDI-24VT
- programmable CDI and PV
controller
...programmable with
Handheld
Programmer and
PC
Supported bikes:
Yamaha:
RD/RZ500
Technical data:
- minimum revs 200 RPM
- maximum revs 20000 RPM
- minimum supply voltage 7 Volts
- recommended power supply voltage 12÷15 Volts
- maximum supply voltage 17 Volts
- current draw 25 mAmp
-
maximum continuous
current for GPO output and shift light
Features:
- fast power-up (also starts only with condenser)
- one isolated input for magnetic pickup
- two independent ignition coil outputs
- two programmable ignition maps with 15 points
- external switch for changing ignition map while
riding
- TPS input (Throttle Position Sensor)
- 3D interpolated ignition map, if TPS enabled
- signal delay compensation
- general purpose outputs (GPO)
- shift light output
- soft rev limit (three stage rev limit)
- quick shift
- tachometer output
- reduced spark at high revs with closed throttle
(TCT mode)
- easy and fast programming on the field, via hand
held programmer
- programming with PC
- programming while machine running
- programmable power valve actuation
- two programmable PV curves
- external switch for changing PV curve while riding
- programmable PV deviation
- programmable max close and max open positions
- self PV test on power-up
- PV error detecting (position sensor failure, servo
motor failure)
- timing calculation for every 1 RPM change (1000,
1002, .. , 9805, 9806, ...)
- signal delay compensation ensure accurate ignition
advance
- instant monitoring of revs and angle, via LCD(hand
held programmer)
- fast processing for high accuracy - delays from 1
us
Download:
PCDI-24VT
programming manual for handheld programmer
PCDI-24VT
programming manual for ZeelProg
wiring diagram RD500
ZeelProg PCDI-24VT
|
