PDCI-MDV
- programmable DC-CD and PV
controller
...programmable with
Handheld
Programmer

Supported bikes:
Cagiva: Mito euro 2,
euro 3
Technical data:
- minimum revs 200 RPM
- maximum revs 20000 RPM
- minimum supply voltage 7 Volts
- recommended power supply 12÷15 Volts
- maximum supply voltage 17 Volts
- stand-by current draw 0.06 Amp
- maximum continuous current for shift light and
power jet output 1 Amp
- peak current for shift light and power jet output
5 Amp
- constant spark energy from idle to 13000 RPM >65mJ
Avoid reverse power supply
connection...circuit can handle reverse power supply
only for short time.
Features:
- fast power-up (also starts only with condenser)
- full power starting spark energy already at 7Volts
power supply
- single isolated input (pickup)
- single independent ignition coil outputs
- advance/retard whole ignition curve
- store and load function for two ignition curves
- external switch for changing ignition curve while
riding
- TPS input for 2T oil pump (Throttle Position
Sensor)
- 2T oil pump output (operates correctly only with
TPS)
- shift light output
- power jet output
- quick shift (shift kill)
- soft rev limit (three stage rev limit)
- tachometer output
- easy and fast programming on the field, via hand
held programmer
- programming while machine running - you can
immediately see effects
- each curve can be set in 4 to 12 curve points
- signal delay compensation
- instant monitoring of rev's and angle, via
LCD(hand held programmer)
- programmable power valve actuation
- store and load function for 5 PV curves
- programmable PV deviation
- programmable max close and max open positions
- self PV test on power-up
- PV error detecting (position sensor failure, servo
motor failure)
- fast processing for high accuracy - delays from
1us
- timing calculation for every 1 RPM change (1000,
1002, .. , 9805, 9806, ...)
Download:
PDCI-MDV programming manual for handheld programmer
wiring diagram
Cagiva Mito euro 2
schema di cablaggio
Cagiva Mito euro 2
wiring diagram
Cagiva Mito euro 3
|